_Row2

DSC Twin 240mm dual friction 1500nm clutch kit

• Medium Pedal effort
• Smooth engagement
• Ideal for late good hp cars seeing street duties
• 750whp / 1500wnm of non abuse use
• This is a good all round street, roll race , circuit clutch to 11sec 1/4mile drag performance.

Kit includes

• Clutch kit 240mm 1 organic + 1 ceramic disc
• Evo 4-9 114T Ring gear
• Pressure plate bolts + safety washers
• Exedy Alignment tool
• Fitting instructions

The ceramic disc in this clutch can squawk from time to time.

This clutch requires run in before full power use.

Clutch Package dimensions:

• Carton 1: 35 x 35 x 15cm 15kg

 Collection from Albion Brisbane or shipping available anywhere.

Engineered for high HP Ecotec V6 builds to T56 LS Box

• Made and assembled in Brisbane using Australian made steels and alloys
• Japan made friction material and spline hubs and diaphragm
• Full face Twin ceramic suited to track and street up to 1000whp
• Solid discs , for lighter mass and faster shifts
• Solid discs eliminate the failure prone heavy sprung hubs
• Individually hand built and tested
• Fully rebuildable
• Accessories available
• This is a performance clutch that is streetable.

Kit includes

• Clutch kit + Flywheel
• Exedy spigot bush SPG118 27/21 stepped OD 15ID
• Plastic aligner tool 29mm x 26spline GM26

Fitment Ecotec to LS T56 Box

• This is a push clutch , ideally likes a 52mm rolled face bearing
• Adaptor from T56 CSC to 52mm rolled face bearing is available.

Clutch Package dimensions:

• 32 x 32 x 15cm 14kg

Collection from Albion Brisbane or shipping available anywhere.

Street series 230mm twin: 1 Organic + 1 Ceramic disc

• Street use up to 650whp / 1250wnm , limited abuse use.
• Assembled and checked in Brisbane
• Rebuildable

Kit includes

• Pull type twin plate clutch kit
• Japanese sourced throw out bearing
• Plastic aligner tool 25.5mm x 24 spline x 12mm spigot

Fitment to all WRX 5 and 6 speed pull type boxes

Clutch Package dimensions:

• Carton 1: 32 x 32 x 15cm 16kg

Collection from Albion Brisbane or shipping available anywhere.

Made and assembled in Brisbane using Australian made steels and alloys

• Japan made friction material and spline hubs and diaphragm
• Versatile combinations 500 to 1500hp , Multiple spline types.
• Individually hand built and tested
• Fully rebuildable
• This is a positive engagement clutch . It is street able, but suited for track use.

Kit includes

• Clutch kit and Flywheel
• Spigot bearing 43.3OD x 15ID x 20mm
• Plastic aligner tool

Clutch Package dimensions:

• Carton 1: 35 x 35 x 15cm 19kg
• Carton 2: 32 x 32 x 10cm 2kg

Nissan Skyline RB 8 ” Billet twin Sintered for competition use only. “Jake Jones – Drift Squid spec”

• Made and hand assembled in Brisbane using Australian made steels and alloys
• High end 800hp – 1200hp drift
• Drags 9.50s and under
• American sourced friction material
• Exedy Japan spline hubs , small parts and diaphragm
• 29mm x 26 spline GM26
• Individually hand built and tested
• Fully rebuildable

Kit includes

• Clutch kit + Flywheel
• Japanese sourced throw out bearing BRG2149 / RCT4064S / GSB for all push gearboxes with 52mm round contact face.
• Plastic aligner tool 29mm x 26 spline
• Japan made Exedy spigot bush
• Fitment to all RB engines using push type gearbox
• Push type conversion needed on pull type gearboxes

Clutch Package dimensions: Carton 1: 32 x 32 x 15cm 16kg

Collection from Albion Brisbane or shipping available anywhere.

• Made and hand assembled in Brisbane using Australian made steels and alloys
• Japan made friction material and spline hubs and diaphragm
• Solid light weight discs for faster shifts and reliablilty (no heavy weak sprung hub)
• Versatile combinations 600 to 1000hp , in NIS24 & GM26 spline
• Individually hand built and tested
• Fully rebuildable

Kit includes

• Clutch kit + Flywheel
• Japanese sourced throw out bearing BRG2149 / RCT4064S / GSB for all push gearboxes
• Plastic aligner tool 25.5 x 24spline
• Japan made Exedy spigot bush
• Fitment to all RB engines using push type gearbox
• Push type conversion needed on pull type gearboxes

Clutch Package dimensions: Carton 1: 35 x 35 x 15cm 14kg

Collection from Albion Brisbane or shipping available anywhere.

DSC Twin 270mm dual friction 1500nm clutch kit

• Medium Pedal effort
• Smooth engagement
• Ideal for late good hp cars seeing street duties
• 750rwhp / 1500nm of non abuse use

Kit includes

• Clutch kit 270mm 1 organic + 1 ceramic disc
• BA – BF Turbo Flywheel inc 157Tooth ring gear (NOT FG TURBO)
• AP Concentric slave cylinder
• Genuine pressure plate bolt set + safety washers
• Exedy spigot bearing
• Exedy Alignment tool
• Fitting instructions

The ceramic disc in this clutch can squawk from time to time.

This clutch requires run in before full power use.

This clutch is NOT suited to drifting or 3^rd gear power skid

Clutch Package dimensions:

• Carton 1: 38 x 38 x 15cm 19kg
• Carton 2: 32 x 32 x 12cm 3kg

 Collection from Albion Brisbane or shipping available anywhere.

Nissan Patrol TB48 1650nm Organic Ceramic Twin

• High Quality steels and alloys
• Billet steel flywheel
• Exedy Japanese bearing
• Positive – engagement
• Rated to 1650wnm

Kit includes

• Twin plate clutch kit including flywheel 1 organic 1 ceramic disc
• Throw out bearing
• Exedy spigot bush 20.6 OD x 16 ID x 20mm wide
• Aligner tool 24 spline x 25.5mm to 16mm spigot

Clutch Package dimensions:

• Carton 1: 38 x 38 x 15cm 14kg

Collection from Albion Brisbane or shipping available anywhere.

Made from quality Japanese Exedy clutch components.

• Australian made Billet Flywheel
• Near 3x factory clamping force.
• Only suited to cars with clutch booster servos fitted
• Japanese made flat face bearing (fitted with machined flat side to clutch fingers)
• Smooth engagement
• Rated to 1200wnm

Kit includes

• Throw out bearing
• Modified Exedy Ford / Viper 4000lb pressure plate
• Exedy 275mm Hi Temp – hard compound Safari Tuff organic disc 24 spline x 25.5mm
• Exedy spigot bush 20.6 OD x 16 ID x 20mm wide
• Aligner tool 24 spline x 25.5mm to 16mm spigot
• Australian made 14kg billet flywheel

Clutch Package dimensions:

• Carton 1: 38 x 38 x 15cm 12kg
• Carton 2: 38 x 38 x 15cm 15kg

Made from quality Japanese Exedy clutch components.

• Australian made Billet Flywheel
• 3x factory clamping force in 300mm Diametre
• Only suited to cars with clutch booster servos fitted
• Japanese made flat face bearing (fitted with machined flat side to clutch fingers)
• Positive / abrupt – engagement
• Rated to 1600wnm

Kit includes

• Throw out bearing
• Modified 4000lb pressure plate 300mm
• Exedy 300mm – 6 button ceramic disc 24 spline x 25.5mm
• Exedy spigot bush 20.6 OD x 16 ID x 20mm wide
• Aligner tool 24 spline x 25.5mm to 16mm spigot
• Australian made 14kg billet flywheel

Clutch Package dimensions:

• Carton 1: 38 x 38 x 15cm 14kg
• Carton 2: 38 x 38 x 15cm 15kg